Recover Primary Image from Backup Image on SRX300

Recovering a Primary Image from the Backup Image on an SRX300

Use the following directions when you log onto the SRX and get the following message:

Go To CLI

>cli

>request system snapshot slice alternate

Formatting alternate root (/dev/da0s2a)...

Copying ‘/dev/da0s1a’ to ‘/dev/da0s2a’….

The following filesystems were archived: /

Contact the customer and inform them you will be rebooting the SRX. They will not have internet for about 5 to 10 minutes but they will still be able to work on Polaris.

>request system reboot

Will reboot the SRX

You can go to your CMD and do a ping on the inside IP address of the SRX with a “-t” to check. When you begin receiving a reply, you will know that the SRX is back up.

Check to make sure the alarm is now off.